• Skip to primary navigation
  • Skip to main content
  • Home
  • Facilities
    • Hypervelocity Impact Laboratory (HVIL)
    • Partnering Facilities
    • Upcoming Partnering Facilities
    • Past Facilities
  • People
    • Leadership
    • Affiliated Faculty
    • Graduate Researchers
    • Undergraduate Researchers
    • Graduate Alumni
    • Undergraduate Alumni
    • Faculty Collaborators
    • Design Teams
  • Research
    • Hypervelocity Phenomena
    • High Strain-Rate Computational Modeling
    • Post-Crash Fire Forensic Analysis on Aerospace Composites
    • Lightning Strike Protection
    • Material Characterization
  • Publications
    • Publication List
    • Presentations
  • News
  • Gallery
  • FAQs
  • Work With Us

Materials for Extreme Environments

Texas A&M University College of Engineering

Uncategorized

First Light Fusion successfully recreates orbital impact velocities at Texas A&M Engineering Experiment Station

Posted on September 5, 2026 by Jack Rahm

From First Light Fusion:

“First Light Fusion (FLF) has successfully completed the first experimental campaign of its VIPER velocity amplifier at Texas A&M Engineering Experiment Station (TEES) Hypervelocity Impact Laboratory (HVIL), demonstrating First Light Fusion’s ability to create some of the most extreme impact conditions encountered in space and high-speed flight.

During the testing programme at HVIL’s two-stage light-gas gun and aeroballistic range, three successful shots were conducted using VIPER velocity amplifiers, achieving projectile velocities exceeding 12km/s – more than 30 times faster than a commercial aeroplane and comparable to the speeds of orbital debris travelling around Earth.

Spacecraft and satellites are constantly exposed to impacts from micrometeoroids and orbital debris travelling at extreme velocities. Even particles smaller than a millimetre in diameter can cause significant or catastrophic damage when travelling at orbital speeds. Until now, generating representative impact conditions for these threats in a laboratory environment has been beyond the capability of most hypervelocity test facilities, limiting access to critical spacecraft resilience data.

VIPER was developed to help solve this problem. By increasing the impact speed achievable in existing real-world test facilities, the VIPER technology enables researchers and engineers to study how materials used for spacecraft components and protective shielding behave under realistic impact conditions which were previously difficult or impossible to recreate on Earth.

Key researchers and collaborators from across the US scientific and aerospace community showed keen interest in the experiments, highlighting growing interest in accessible, high-velocity impact testing capabilities outside traditional large-scale government facilities.

Dr. Tim Ringrose, Lead Scientist at FLF, said: “This campaign was a major milestone for the VIPER programme. Demonstrating the system successfully in a real-world operational laboratory environment at TEES HVIL validates both the underlying technology and its potential to dramatically increase the performance of existing two stage light gas gun facilities.  The results open exciting opportunities for future hypervelocity testing applications here in the UK.”

Texas A&M University (TAMU) professor Thomas E. Lacy Jr., Director of TEES HVIL, added: “The VIPER velocity amplifiers have dramatically expanded the achievable projectile velocities using 2SLGGs. This has important implications for research involving micrometeoroid and orbital debris (MMOD) impacts to space vehicles/structures, re-entry vehicles, hypersonics, and other applications where ultra-high-rate small particle impacts are a serious concern.”

The successful TEES HVIL campaign represents an important step in FLF’s strategy to commercialise advanced hypervelocity testing technologies for applications across space, defence, and advanced materials research.

Following the success of VIPER, First Light Fusion is now progressing development of future VIPER variants, including systems designed for improved projectile control and solid spherical projectile launch capability. These next-generation systems are expected to further expand the accessible hypervelocity testing regime and support a broader range of experimental applications.”

https://firstlightfusion.com/media/first-light-fusion-successfully-recreates-orbital-impact-velocities-at-texas-am-engineering-experiment-station/

Filed Under: Uncategorized

TAMU HVIL Welcomes Miami Hurricanes to Kyle Field for CFP 2025!

Posted on December 19, 2025 by Sidney Davis

https://telacyjr.engr.tamu.edu/wp-content/uploads/sites/228/2025/12/Howdy-Hurricanes-Welcome-to-Kyle-Field.mp4

Filed Under: Uncategorized

New Research Article from the HVIL Team!

Posted on June 19, 2023 by TAMU HVIL

Filed Under: Uncategorized

Two-stage light-gas gun is ready to be installed

Posted on October 18, 2019 by kkraj

Our team is very excited for the week of 28th October, as our two-stage light-gas gun is going to be installed. The lab is all setup and almost ready for the installation.

Filed Under: Lab Update, Uncategorized

$130M Bush Combat Development Complex breaks ground at Texas A&M system RELLIS Campus

Posted on October 18, 2019 by kkraj

$130M Bush Combat Development Complex breaks ground at Texas A&M system RELLIS Campus

Filed Under: Uncategorized

© 2016–2026 Materials for Extreme Environments Log in

Texas A&M Engineering Experiment Station Logo
  • Hypervelocity Impact Laboratory (HVIL)
  • College of Engineering
  • J. Mike Walker ’66 Department of Mechanical Engineering
  • Center for Infrastructure Renewal
  • George H.W. Bush Combat Development Complex
  • Contact Information
  • Hypervelocity Impact Laboratory Youtube
  • Hypervelocity Impact Laboratory LinkedIn
  • State of Texas
  • Open Records
  • Risk, Fraud & Misconduct Hotline
  • Statewide Search
  • Site Links & Policies
  • Accommodations
  • Environmental Health, Safety & Security
  • Employment